PhoenixMiner 6 2c: fastest Ethereum Ethash miner with lowest devfee Win Linux

Of course, if you keep your earnings in crypto and hope that it will go up, it may be a lot more than that but this is a risk that a lot of miners can’t or won’t take. We can guarantee that the executables are 100% clean. We even decided to avoid packing the executable to allow better inspection by the anti-virus programs. Still, there is always some chance that an over-aggressive anti-virus program will give you a false positive but you can safely ignore it.

  • Even if every miner decided to create 1000 bitcoins per block, full nodes would stick to the rules and reject those blocks.
  • Connect your miner to appropriate algorightm port and set auto switch on “Hub Workers” page.
  • As for the mining speed, my rig has 6x ASUS Strix 570 OC and under Claymore’s miner it makes about 173 mhs.
  • I know Quadro cards are not suitable for mining but i can run ccminer almost all algo and siaminer in it with no issue.
  • You can also use another, more flexible way of specifying different values for the different cards.

Hardware control options are supported for both AMD and Nvidia cards under Windows. Under Linux most options are supported only for AMD cards. This allows you to use older cards with small VRAM or low hashate on current DAG epochs (e.g. GTX970). You can mine different algo coins by using Hub feature, or third party mining helper programs.

The first new connection was observed after 16 minutes of mining, which connected to another pool (ehtermine.org) and the miner showed that it was mining for developer fee. It disconnected after 35 seconds as advertised. After that I left the rig alone and analyzed the Wireshark and the other logs the next day. Use the -cdmport command-line option to change the CDM remote port form its default value. If you use other programs for hardware control, conflicts are possible and quite likely. Use something like GPU-Z to monitor the voltages, etc.

Auto Switches

PhoenixMiner as administrator for the VRAM timing options to work. Including the “Remote manager” application that is part of Claymore’s dual miner package. So you can use your existing configuration files without any changes. To 1100 MHz for all cards, except the cards 1 to 3, on which it is set to 1090 MHz, and card 4 to 1300 MHz. You can also use another, more flexible way of specifying different values for the different cards. Corresponding “-vmr” values that are showed in the log file, and then use “-vmr” instead with adjusted values.

  • If this option is not specified (or specified as -1), the default LHR unlock intensity is 520.
  • Corresponding “-vmr” values that are showed in the log file, and then use “-vmr” instead with adjusted values.
  • If you use other programs for hardware control, conflicts are possible and quite likely.
  • These ports switch coins time to time to mine the most profitable coin.
  • 2 – full (include core/memory clocks, voltages, P-states).

The miner connected to the devfee pool every 90 minutes, with one exception when it wasn’t able to connect to the ehtermine.org. It then tried again after 13 minutes and then resumed the normal 90 minutes period between devfee connections. Also, no files outside the current folder were opened or touched.

Auto switching ports per algo. Sorted for AMD GPU

PhoenixMiner also supports dual mining (simultaneous mining of ethash/ubqhash and other cryptocoin algorithm). Full compatibility with the industry standard Claymore’s Dual Ethereum miner, including most of command-line options, configuration files, and remote monitoring and management. Detailed statistics, including the individual cards hashrate, shares, temperature, fan speed, clocks, voltages, etc. We provide auto switching port for each algo. These ports switch coins time to time to mine the most profitable coin.

Good for GPU miners but need some knowledge to set up and optimize. Select any coin and check its port number. Just start mining with appropriate miner and algo right away.

Coin mining status and profits. Sorted for AMD GPU

Well, I’m not sure I qualify as “security expert” but I certainly am a “full-time security paranoic” And as no one else seem to risk it, I downloaded and tested the miner as well as I could. First of all claymore would be even now to lower his devfee, especially on the miner 12.6 equiash, which still the devfee is high, and lasts 90 seconds. There are so many obstacles for your miner program to enter the competition, like trust, benefit, speed, stability, feature, and … Unfortunately, the miner is not for sale, it is free to use with the devfee of 0.65%, which we think is very reasonable.

As for the mining speed, my rig has 6x ASUS Strix 570 OC and under Claymore’s miner it makes about 173 mhs. With Phoenix the speed was about 174.5 mhs, which is not much better but I guess is still something. The power consumption from the wall was about the same ( W).

ethersocial

Report to moderator There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, which will follow the rules of the network no matter what miners do. Even if every miner decided to create 1000 bitcoins per block, full nodes would stick to the rules and reject those blocks. You will find an example epools.txt file in the PhoenixMiner’s directory.

Command-line options to limit the GPUs that given instance of PhoenixMiner actually uses). Probably should) specify the VRAM timing What is Dinastycoin options per-GPU. Generally, the “-vmt3” option has little effect on the hashrate, so first try adjusting the other parameters.

Mining Pool Hub

In my opinion it is right that there is a lot of competition, if the miner of this boy is faster than only 1% compared to claymore or other miners, considering the devfee 0.65% and more gain for us miners. If you have only AMD cards, add the option -amd to the command line. In such case the “-straps” option must be specified first. Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower “-vmr” values). Fixed fan speed (e.g. -tt -40), or -fanmin is used, the miner will not allow the fans to stop rotating. Calculating the total power consumption of the rig.

It connected to my mining pool as it should and then opened port 3333, which turned out to be the port for remote control similar to Claymore’s miner. I disabled to remote port with the “-cdm 0” commnad-line switch and restarted the miner. Sure enough, this time port 3333 wasn’t opened and the only connection was the one to my pool.

Some Nvidia cards will report a lot of stale shares under Windows 11. Using the same driver version under Windows 10 resolves the issue. Connect your miner to appropriate algorightm port and set auto switch on “Hub Workers” page.

  • Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower “-vmr” values).
  • First of all claymore would be even now to lower his devfee, especially on the miner 12.6 equiash, which still the devfee is high, and lasts 90 seconds.
  • This means that anti-dubugger code is kicking in.

2 – full (include core/memory clocks, voltages, P-states). Its options will take precedence over whatever you have specified in the command-line. If this option is not specified (or specified as -1), the default LHR unlock intensity is 520. Please note that PhoenixMiner is extensively tested on many mining rigs but there still may be some bugs.

Mining Pool Hub

However i have not yet run any Ethash based miner. This means that anti-dubugger code is kicking in. Probably you have some kind of CUDA profiler or debugger running and PhoenixMiner is terminating to avoid reverse engineering. At any rate we haven’t tested Quadro cards as they are not very often used for mining. While 1% or so may seem too little to matter, the hard truth about mining is that you have to pay your electricity bill and the amortization costs of the hardware, so the real ROI is often less than 20% per year.

And i am glad that your miner has it shown, Nobody could convince claymore to print it. (also i took “-log 2”, nice!! you had it!). I know Quadro cards are not suitable for mining but i can run ccminer almost all algo and siaminer in it with no issue.

If you are using the dual mining feature PhoenixMiner will mine for us for 35 seconds every 65 minutes. When mining with LHR cards, the hashrate will start lower and will go up to its normal value in about 2-4 minutes (similar to the auto-tune process on AMD cards). You can mine coins based on best profit reward automatically by setting Auto Switch to your workers using hub. Yes you are correct the difficulty is the most important if i am trying to solve a block….

Auto switching ports per algo. Sorted for AMD GPU

You will find an example config.txt file in the PhoenixMiner’s directory. Buffer, which can lead to excessive number of stale shares. Ethash hashrate regardless of the secondary https://cryptolisting.org/ coin hashrate. Set to 0 to disable automatic switch back to primary pool. So you can use the same command line options as the ones you would have used with Claymore’s miner.

Leave a Comment

Your email address will not be published. Required fields are marked *